UV Energy Meter
使用说明
Instructions:
1. 按下UV能量计的开关到“ON”，显示屏将显示“0”。
2. 把能量计翻转放到照射平面上（传感器安装在一起之背面，亦能抵受较高的温度。）
3. 待仪器通过了输送带后，从正面阅读结果。UV能量计将显示如：xxxmJ/cm2。
4. 在进行新的测量程序前，必须首先关闭仪器电源开关，然后再次打开。显示屏上将重新调至“0”然后按照步骤2继续操作。
1. Press the power switch to “ON” and the screen displays “0.”
2. Turn the energy meter to the illumination plane (Back to the side that sensors are installed to. It can withstand high temperature).
3. Read results on the front after the meter passes by the conveyer belt. The UV energy meter will display as xxxmJ/cm2.
4. The meter must be powered off before a new measurement is started. Then power on it. Adjust the display to 0 and then continue with step 2.
主要技术参数
Main Technical Parameters
